Leisure Tech Products
Canadian Retail Price List ......Effective: March 02, 2009
(Our Dealers may sell for less)
All Prices in Canadian Dollars
Parts - Predator & Freestyle
| CN1005 | CNC tail gearbox unit | $149.99 |
| CN1006A | CNC HD Clutch unit unit | $135.99 |
| CN2300 | NEW - Engine Stabilization system | $64.99 |
| CN3148G | Green/Checker Predator canopy | $179.95 |
| CN3148P | Purple/Checker Predator canopy | $179.95 |
| CN3148R | Red/Checker Predator canopy | $179.95 |
| HC6001 | Predator 60/90 C/F frame set | $239.95 |
| HC6002 | Front SX T/R pushrod set | $64.99 |
| HC6002-2 | Machined T/R bellcrank w/bearings | $29.99 |
| HC6004 | Freestyle conversion kit | $529.95 |
| HI6009 | Predator Cooling Fan | $12.99 |
| HI6009A | Gasser cooling fan | $89.99 |
| HI6020 | Predator Fan Shroud | $16.99 |
| HI6020A | Predator GS Fan Shroud | $33.99 |
| HI6031 | CCPM bellcranks | $17.99 |
| HI6032 | CCPM Elevator lever set | $14.39 |
| HI6032A | Metal Elevator lever set | $38.99 |
| HI6032-1 | H/D plastic elevator A-Arm only | $5.49 |
| HI6056 | Black ST Pred 90T maingear | $16.69 |
| HI6058B | Machine Crown Gear | $26.49 |
| HI6058C | Machined Maingear - 90T | $31.99 |
| HI6058D | Machined Maingear - 93T | $31.99 |
| HI6058E | Machined Maingear - 92T | $31.99 |
| HI6058F | 90T Complete Constant Drive Unit | $169.99 |
| HI6058G | 93T Complete Constant Drive Unit | $169.99 |
| HI6058H | Machined Maingear - 88T | $31.99 |
| HI6058K | Slipper Cap & inner sleeve | $51.99 |
| HI6058L | 2 x Slipper O-Rings | $2.79 |
| HI6058M | CT auto hub inner gear | $49.99 |
| HI6058N | CT auto hub outer gear | $66.99 |
| HI6058P | Slipper Hub w/Torrington Bearing | $64.99 |
| HI6058Q | CT auto unit w/o maingear | $89.99 |
| HI6060 | front tail transmission assembly | $16.99 |
| HI6060A | NX front tail transmission assembly | $17.99 |
| HI6064A | Inner Hub unit for Spraque CT | $57.99 |
| HI6064B | CT Outer Hub unit with Spraque | $99.99 |
| HI6064C | Spraque Auto assembly w/o gear | $138.99 |
| HI6064D | 2 x Auto hub shim washers | $5.59 |
| HI3096B | T/R Blade Grips(2) - SE | $16.49 |
| HI6065A | SS torque tube support set | $20.59 |
| HI6067 | Plastic Sport tail fin set | $13.99 |
| HI6067A | Carbon SE tail fin set | $62.59 |
| HI6068 | Tail fin mount set | $10.99 |
| HI6078 | Tail gearbox | $13.99 |
| HI6078A | NX Enhanced Tail gearbox | $16.99 |
| HI6080 | Tail boom sevo mount set | $16.99 |
| HI6082 | Tail boom strut support bridge | $10.99 |
| HI6096 | Tail rotor blade grips | $14.99 |
| HI6099 | Plastic Sport tail blades - 95mm | $9.79 |
| HI6102 | Tail pitch lever set | $8.19 |
| HI6106 | Adjustable tail pushrode guides | $9.79 |
| HI6122 | 2 x GRP landing gear struts | $20.59 |
| HI6122A | 1 x C/F landing gear strut - 10mm skids | $24.99 |
| HI6122B | 1 x C/F landing gear strut - 12MM SKIDS | $31.99 |
| HI6122C | 1 x TALL C/F landing gear strut - Condor | $45.39 |
| HI6130 | White gel-coat F/G canopy only | $74.99 |
| HI6130A | Painted F/G one piece canopy | $82.99 |
| HI6131 | Predator & Max Decal Set | $13.99 |
| HI6131A | Predator GS Decal Set | $13.99 |
| HI6132 | Predator 60/SE & Max Manual | $13.99 |
| HI6132A | Predator GS Max Manual | $13.99 |
| HI16133 | Windshield for H16030 Canopy | $16.69 |
| HI6138 | Fuel tank with fittings | $17.59 |
| HI6138A | GS Fuel tank spacer | $7.59 |
| HI6138B | GS Fuel tank fittings | $16.59 |
| HI6138C | Fuel tank only | $16.59 |
| HI6145 | Ball link set (26 long/4short) | $19.59 |
| HI6153 | Washout guide | $17.89 |
| HI6154 | Torque tube drive coupler | $20.49 |
| HI6160 | Rotor Head Hub & Yoke | $31.29 |
| HI6167 | 2 x Special Seesaw ball joints | $8.39 |
| HI6179 | 20 gram grey flybar paddles | $13.69 |
| HI6179A | 30 gram black flybar paddles | $13.69 |
| HI6181 | 6 x original O-ring dampers | $3.99 |
| HI6181A | 4 - dampers - Red | $6.39 |
| HI6181B | 4 - Harder dampers - Black | $6.39 |
| HI6181C | 4 - Hardest dampers 90 durometer | $6.39 |
| HI6184 | 2 x Main rotor blade grips | $17.99 |
| HI6184A | 2 x NX Main rotor blade grips | $19.69 |
| HI6189 | machined bell mixer arm set | $36.89 |
| HI6189A | machined bell mixer arm set: 1/1 | $59.79 |
| HI6200 | 3 feet tygon GS fuel line | $6.79 |
| HI6201 | 3 feet Hanson fuel line | $8.29 |
| HI6202 | 2 x 3/32" x 6" Neoprene fuel line | $8.59 |
| RDAMP | L/G damper set | $28.69 |
| HW6000 | Hardware package | $38.59 |
| HW6001 | Head bolt and washer set | $4.29 |
| HW6005 | starter shaft | $9.79 |
| HW6007 | Starter shaft block w/bearings | $45.69 |
| HW6011A | Clutch shoe | $39.39 |
| HW6011B | GS-clutch shoe | $39.69 |
| HW6011HD | GS-HD clutch shoe | $48.69 |
| HW6012 | Fan Hub | $33.39 |
| HW6012A | GS Fan Hub | $39.39 |
| HW6012HD | GS- HD Fan Hub | $39.39 |
| HW6012HDV2 | HD/V2 GS Fan Hub | $39.39 |
| HW6013 | 10T Clutch bell | $55.39 |
| HW6013A | 11T Clutch bell | $55.39 |
| HW6013B | 12T Clutch bell | $55.39 |
| HW6013D | 13T Clutch bell | $55.39 |
| HW6013E | 15T GS Clutch bell | $55.39 |
| HW6013M | Clutch bell w/o pinion | $39.29 |
| HW6014 | Clutch liner x 2 | $4.99 |
| HW6015 | Split collet set | $14.99 |
| HW6015A | Bottom collet only | $11.69 |
| HW6015B | Upper threaded collet only | $11.69 |
| HW6017 | Engine mount | $23.99 |
| HW6018 | 10T Clutch Pinion only | $20.99 |
| HW6018A | 10T Clutch bell | $22.19 |
| HW6018B | 11T Clutch bell | $22.19 |
| HW6018C | 12T Clutch bell | $22.19 |
| HW6018D | 14T Clutch bell | $22.19 |
| HW6018E | 15T Clutch bell | $22.19 |
| HW6018F | 16T Clutch bell | $22.19 |
| HW6019 | Clutch Bell w/lining only | $39.99 |
| HW6042 | upper block w/bearings | $20.99 |
| HW6042A | U/G upper block w/thrust bearing | $48.29 |
| HW6045 | lower block w/radial bearings | $34.79 |
| HW6045A | 2 x thrust bearing spacers | $5.59 |
| HW6053 | mainshaft | $12.59 |
| HW6054 | Mast stopper w/bottom collar | $8.19 |
| HW6054A | Rotor hub collar and screw | $12.59 |
| HW6059 | Tail transmission drive shaft | $8.39 |
| HW6062H | 60 tail boom - 795mm | $15.29 |
| HW6062AH | Max tail boom - 825mm | $21.99 |
| HW6062BH | GS tail boom - 855mm | $21.99 |
| HW6062CH | extra long GS tail boom - 945mm | $23.39 |
| HW6063S | 60 SS torque tube | $40.49 |
| HW6063AS | MAX SS torque tube | $40.49 |
| HW6063BS | GS SS torque tube | $46.99 |
| HW6063CS | Extra long SS torque tube | $46.99 |
| HW6065 | Tail pitch control rod system | $20.89 |
| HW6065B | CNC Rod ends only from HW6065 | $17.99 |
| HW6070 | Tail gearbox input shaft | $8.39 |
| HW6073 | Tail gearbox output shaft | $6.89 |
| HW6074 | Output shaft spacer tube | $2.79 |
| HW6075 | Spiral tail gear set | $32.99 |
| HW6075A | Spiral speed up tail gear set | $32.99 |
| HW6110A | upper side frames | $54.99 |
| HW6110B | upper side frames w/bearings | $79.99 |
| HW6112 | 2 x servo side frames | $17.99 |
| HW6112A | Verticle front frame & Battery trey | $25.99 |
| HW6112B | Verticle front frame - GS | $34.99 |
| HW6112c | Battery trey - GS | $21.99 |
| HW6115 | Lower front frames L & R | $45.89 |
| HW6115A | Lower rear frames L & R | $45.89 |
| HW6115B | GS-Lower front frames L & R | $48.59 |
| HW6115C | GS-Lower rear frames L & R | $44.59 |
| HW6117 | lower gear and X-frame | $25.79 |
| HW6117A | GS Rear X-frame | $30.99 |
| HW6117BK | GS landing gear frame | $36.79 |
| HW6117C | Lower landing gear frame | $14.39 |
| HW6117D | Rear X-frame 60 & Max | $10.99 |
| HW6118 | GS - Fan shroud mount plate | $38.39 |
| HW6118A | pull start mount plate - GS | $41.69 |
| HW6123 | 10mm L/G skids | $20.89 |
| HW6123A | 12mm L/G skids | $23.39 |
| HW6125 | Canopy mount with grommets | $15.29 |
| HW6125A | Canopy and mounting set - GS | $24.79 |
| HW6127 | Front frame standoff set (6) | $12.59 |
| HW6127A | Rear frame standoff set (6) | $12.59 |
| HW6127B | GS Rear frame standoff set (6) | $13.99 |
| HW6127C | GS landing gear standoff set (6) | $25.79 |
| HW6146 | Predator dual bearing swashplate | $83.49 |
| HW6173 | 4mm flybar | $7.69 |
| HW6176D | Machined metal flybar control yoke | $46.49 |
| HW6180 | Standard floating feathering spindle | $13.69 |
| HW6180A | feathering spindle w/center ball | $13.69 |
| HW6180B | feathering spindle w/ball & clips | $16.49 |
| HW6182 | Damper shim set | $4.49 |
| HW6183 | Blade grip thrust washers | $4.49 |
| HW6192 | Upper linkage set (6 rods) | $6.39 |
| HW6192A | Lower linkage set (8 rods) | $6.99 |
| HW6192b | GS throttle linkage and carb arm | $22.59 |
| HW6202 | Aluminum tail boom support struts | $13.99 |
| HW6202A | C/F tail boom support struts | $34.99 |
| HW6203 | M5 x 22 x 1.5mm blade spacers (4) | $6.89 |
| HW6204 | M3 x 9x 2mm tail blade spacers (4) | $6.89 |
| HW6205 | M3 x 5 x 3mm spacers (4) | $5.49 |
| HW6206 | M3 x 5 x 2mm spacers (4) | $5.49 |
| HW6207 | M6 x 13 x 0.2 engine spacers | $5.49 |
Terms: VISA, MASTER CARD, C.O.D and PREPAID orders .
Shipping: All Shipping Via insured Parcel Post at Buyer's expense