Leisure Tech Products
Canadian Retail Price List ......Effective: March 02, 2009
(Our Dealers may sell for less)
All Prices in Canadian Dollars
Hirobo Helicopter Upgrades Century
|
Code# |
Description |
Price |
|---|---|---|
|
SPECIAL - G-10 fins for SHUTTLE |
$22.95 |
|
|
SPECIAL - Machined Clutch Bell UPGRADE for SHUTTLE Z/ZX |
$59.95 |
|
|
SPECIAL - Rear T/R servo Mount for SHUTTLE |
$9.95 |
|
|
SPECIAL - Machined Cooling Fan for SHUTTLE |
$44.95 |
|
|
- 3D Carbon Fibre Tail Fin Set for SHUTTLE |
$57.95 |
Hirobo Helicopter Upgrades ARK
|
Code# |
Description |
Price |
|
Anodized Aluminum Seesaw Arms only |
$29.95 |
|
|
Anodized Metal PRO ROTOR HEAD |
$169.95 |
|
|
Anodized Aluminum Battery Tray and servo tray stiffener |
$49.95 |
|
|
Anodized Aluminum Washout Arms only |
$34.95 |
|
|
Anodized Aluminium Blade Pitch Arms (replaces original Z/ZX or 1031-012) |
$19.95 |
|
|
Anodized Aluminum Blade Grips with bearings (will fit Shuttle and Concept heads) |
$99.95 |
|
|
Anodized Aluminum Seesaw Arms with bearings |
$59.95 |
|
|
Anodized Aluminum Washout Arms with bearings |
$59.95 |
|
|
- Aluminum Heat Sink Motor Mount Load Blocks |
$31.95 |
|
|
Anodized Metal Swashplate |
$129.95 |
|
|
- DHF-320 Machined Rotor Head (must use bearings from ZXX blade grips) Due end November |
$179.95 |
|
|
- T/R pushrod adapters (2 ea.) for mounting ball links |
$12.95 |
|
|
Machined Aluminum T/R Transmission Case |
149.95 |
|
|
Aluminum Seesaw without bearings |
$56.95 |
|
|
Aluminum Washout with Centre Bushing |
$34.95 |
|
|
4 ea. bearings for seesaw or washout control arms |
$39.95 |
|
|
10 ea. bearing spacers (3mm x 4.5mm x 0.5mm) |
$4.95 |
|
|
Thrust bearing set for FZ & ARK Head |
$49.95 |
|
|
Dome for Shuttle FZ Head |
$24.95 |
|
|
Large Aluminum Head Dome for PRO HEAD |
$29.95 |
|
|
WHITE Tail Boom - SHUTTLE Z/ZX/ZXX |
$12.00 |
|
|
Feathering Spindle for 0401-027 Thrust Bearing Upgrade |
$7.00 |
|
|
0402-012 |
Center Hub for ARK 1031-012 Head |
$22.00 |
|
0405-012 |
Rubber Dampers for ARK 1031-012 Head |
$9.00 |
|
1031-002 |
BLACK Tail Boom - SHUTTLE Z/ZX/ZXX |
$12.00 |
|
Stainless Steel Stabilizer/Flybar |
$9.00 |
|
|
Standard Replacement Feathering Spindle |
$7.50 |
|
|
Landing Gear Replacement for 30/46 helis - White Struts |
$34.00 |
|
|
Machined and Anodized Aluminum T/R Pitch Plate and Slider |
$59.95 |
|
|
Balljoints with 3mm thread - long stand off (4/pkg.) |
$8.50 |
|
|
- Balljoints with 3mm thread - midium stand off (6/pkg.) |
$11.95 |
Hirobo Helicopter Upgrades K & S
|
Code# |
Description |
Price |
|
C/F tube flybar stiffener w/machined arms |
$39.95 |
|
|
SPECIAL - Carbon Graphite servo tray set for Shuttle |
$12.95 |
|
|
SPECIAL - No-Flex collective pivot front frame support |
$4.95 |
|
|
SPECIAL - NMachined gear strut attachment blocks (4/pkg) |
$4.95 |
|
|
KS-485 |
Stainless steel 3mm x 370mm flybars (2/pkg) |
$12.95 |
|
SPECIAL - 550mm Multi-laminated ARF wood blades only (req. plastic bade roots from broken KS-826 |
$21.95 |
|
|
Molded Universal Tailboom Servo Mount (fits all Booms) |
$26.95 |
Hirobo Helicopter Upgrades NIFTEC
|
Code# |
Description |
Price |
|
- Tail Rotor with Thrust Bearing and Dual ball bearings - one piece blade grips - anodized centre hub - Baron 30, Hawk, Falcon, MyStar, JR and most others... |
$135.95 |
|
|
Dual ball bearings - one piece blade grips black anodized centre hub - Shuttle and GPH |
$99.95 |
|
|
- like T40030 for use with original Shuttle H-links - |
$45.95 |
|
|
- replacement pitch plate for T40020 - |
$9.95 |
|
|
Direct replacement Shuttle vertical fin |
$16.49 |
|
|
Direct replacement Shuttle horizontal fin |
$9.95 |
Terms: VISA, MASTER CARD, C.O.D and PREPAID orders .
Shipping: All Shipping Via insured Parcel Post at Buyer's expense